Login

Contact

Configure the card reader for Bluetooth connection

The Bluetooth pairing is done in two steps. The first step activates the pairing on the card reader and the second step initiates the actual pairing from your phone.

On the card reader do the following:

  • Start the card reader by pressing the power key and wait until the Bluetooth logo appears in the upper left corner of the screen.
  • Hold down the green [✔] key until the Bluetooth symbol in the upper left corner of the display starts to blink.

Switch over to your phone and do the following:

  • In the Settings App, go to Bluetooth and make sure it’s turned on. In the Devices section, a device named “Miura” should appear.
  • Tap on the device to initialize the pairing.
  • Tap the Pair button of the alert that will appear soon.

On the card reader:

  • Press the green [✔] key to confirm the pairing.

On your phone:

  • Verify, that it says “Connected” right next to the device name in the Devices section.

Use the Miura reader with several mobile devices

The Miura can only be paired with one mobile device (smartphone or tablet) at a time and needs to go through the pairing process before it can be used with another mobile device.

In some cases, the reader might still appear in the list of connected Bluetooth devices on one mobile device, after it has been connected to another mobile device. Delete the reader from the list of connected Bluetooth devices of the first mobile device before you start the pairing process with it.