Login

Contact

Miura Card Reader Update & Configuration for Windows

There are two types of Miura M010 Card Readers that you can use:

  1. The classic Miura M010 which has Bluetooth and USB connectivity
  2. The WiFi Miura M010, which features WiFi and USB connectivity (but no Bluetooth)

You can recognize WiFi units by their WiFi icon (left to the blue LED).

Before you are able to perform the first transactions with the Miura M010 on Windows, you need to make sure that it already runs at least Miura OS V7-6 and Miura MPI V1-39.

This is only required for TEST Card Readers, since there are issues with Miura OS V7-5 that prevent us from updating to OS V7-6 automatically.
Once you order LIVE Card Readers for Windows, we will make sure they ship with Miura OS V7-6, Miura MPI V1-39 and - if required - USB Serial Mode enabled by default.

Upgrading your Miura to OS V7-6 and MPI V1-39 (Only for TEST card readers using older versions)

First download this ZIP containing the Miura OS/MPI.

Update to OS V7-6

  1. Connect M010 to the PC with USB. A new drive called "MIURA" should appear.
  2. Copy the two files from the folder "1 OS" to the "MIURA" drive.
  3. Eject the "MIURA" drive and disconnect the USB cable.
  4. The Card Reader will update itself to OS V7-6.

Update to MPI V1-39

  1. Connect M010 to the PC with USB. A new drive called "MIURA" should appear.
  2. Copy the two files from the folder "2 MPI" to the "MIURA" drive.
  3. Eject the "MIURA" drive and disconnect the USB cable.
  4. The Card Reader will update itself to MPI V1-39.

Verify, that the Miura now shows MPI V1-39 when starting up.

Please make sure to do all updates one by one and in this order.

Configuring your Miura for USB Connectivity

Please contact our support to enable USB mode for your application. Otherwise, the update will be removed from the reader.

In order to connect to the Miura via USB, you need to put it into USB Serial Mode. Take a look at this page for detailed instructions.

Configuring your Miura for WiFi Connectivity

Make sure your Miura M010 is WiFi capable (WiFi icon left to the blue LED). In order to connect to the Miura via WiFi, take a look at this page for detailed instructions.

Troubleshooting

Mount the "MIURA" drive while USB Serial Mode is enabled

  1. Hold down the number 9 key and then press the reset button with a paperclip. The reset button is located in the hole next to the power button.
  2. Connect M010 to the PC with USB. After a while, a new drive called "MIURA" should appear.

Disable USB Serial Mode altogether

To disable USB Serial Mode again, just do a Factory Reset.