Login

Contact

How do I connect the Miura reader to my phone?

Last changed: Thu, 23 Feb, 2017 at 1:45 PM

iOS

In order to connect your iOS device (iPhone/iPad/iPod) to the Miura M010 Card Reader follow the steps below:

1. Activate bluetooth on your iOS device

  • Open the Settings of your iOS device, select Bluetooth and turn it on. 

2. Activate bluetooth on the Miura M010

  • Press the small on/off button on the top right of the reader. 
  • The Bluetooth symbol will flash in the top left of the screen. If it is not flashing, hold down the green tick on the keypad for 5 seconds, lift your finger and quickly press the green tick again. The Bluetooth symbol will start flashing which indicates that the Miura M010 is searching for a device to pair with. 

3. Pairing your Reader and Device

  • In the Bluetooth settings of your iOS device, the Miura should appear once your device has "found" the card reader. Select this Miura device to begin the pairing process.
  • On your Miura M010 screen, you will be prompted with a message: Bluetooth Confirm Passkey 123456 (this number will vary)
  • On your device you will receive a prompt that Miura would like to pair with your device. 
  • Check that the number displayed on the Miura is the same as the numbers displayed on your device. If they match, select Pair on your device and the green tick key on your Miura card reader. 
  • On your Miura M010, you will receive a confirmation message: Passkey Confirmed. The Bluetooth symbol will stop flashing on the screen. 
  • To pair your reader again, select Settings then Bluetooth on your device. In the list of Bluetooth paired devices, select Miura and "Forget this device". On the Miura, hold down the green tick for 5 seconds. Repeat the pairing process as above. 


Android

In order to connect your Android device to the Miura M010 Card Reader follow the steps below:

1. Activate bluetooth on your Android device

2. Activate bluetooth on the Miura M010

  • Press the small on/off button on the top right of the reader. 
  • The Bluetooth symbol will flash in the top left of the screen. If it is not flashing, hold down the green tick on the keypad for 5 seconds, lift your finger and quickly press the green tick again. The Bluetooth symbol will start flashing which indicates that the Miura 

3. Pairing your Reader and Device

  • In the Bluetooth settings of your Android device, the Miura should appear once your device has "found" the card reader. Select this Miura device to begin the pairing process.
  • On your Miura M010 screen, you will be prompted with a message: Bluetooth Confirm Passkey 123456 (this number will vary)
  • On your Android device you will receive a prompt that Miura would like to pair with your Android device. 
  • Check that the number displayed on the Miura is the same as the numbers displayed on your Android device. If they match, select Pair on your device and the green tick key on your Miura card reader. 
  • On your Miura M010, you will receive a confirmation message: Passkey Confirmed. The Bluetooth symbol will stop flashing on the screen. 
  • To pair your reader again, select Settings then Bluetooth on your Android device. In the list of Bluetooth paired devices, select Miura and "Unpair". On the Miura, hold down the green tick for 5 seconds. Repeat the pairing process as above.